By default the gateBee is setted to use DHCP but is simple, as always in microBees, to configure your manual settings.
1 - Reach your gateBee
If you already know the gateBee IP go to http://YOUR-GATE-IP.
If you are not aware about your gateBee IP install Bonjour or MDNS service (https://support.apple.com/kb/DL999 for Windows and Avahi for Unix users) and go to http://gateBee.local .
2 - Network Settings
Choose if you want use DHCP or set manually your LAN configuration.
Populate the settings form and submit.
3 - Done
The configuration will take about 30 seconds.
When the countdown ends, if your settings were corrected, you will be redirect to your gateBee homepage and you can start to use microBees.
In case of misconfiguration follow “If gateBee is not registered to your LAN” guide.
If gateBee is not registered to your LAN
Click on gateBee button 10 times, the gateBee will assume IP 192.168.1.123 and Gateway 192.168.1.1 .
So set your computer IP to 192.168.1.x (http://windows.microsoft.com/en-US/windows/change-tcp-ip-settings#1TC=windows-7 for Windows users) and connect gateBee Ethernet wire directly in your computer.
Go to point 1.